Specifications: 7330 available from Colby & Oakley Implement, KS

 
Specifications: 
MANUFACTURER John Deere
MODEL 7330 Tractor
Official Test  
    Nebraska Test Number NA
Engine  
    Manufacturer John Deere 6.8L PowerTech E
    Aspiration Turbocharged
    Cylinders/Displacement, cu. in. (liters) 6/414 (6.8)
    Cylinder Liners Wet
    Fuel Tank Cap., US Gal. (L) (Open; Cab) ---
        Standard 66 (250)
        Optional 83 (315)
    Underhood muffler Yes
Performance  
    Advertised PTO HP (kW) @ Rated RPM 127 (95) @ 2100 per SAE
    Official PTO HP (kW) @ Rated RPM NA
        @ Standard PTO @ Eng RPM NA
        Maximum @ Eng RPM NA
    Advertised Engine HP (kW) @ Rated Speed 155 (114) @ 2100 per ISO 97/68/EC
    Max Unballast Drwbr HP (kW) @ Eng RPM NA
    Maximum Torque (PTO) @ RPM, lb-ft (Nm) NA
    Max Torque Rise (80% Rtd Spd) @ Eng RPM NA
    Maximum Torque Rise % (PTO) @ Eng RPM NA
Fuel Use, U.S. gal./hr. & HP hr./gal. at:  
    PTO @ Rated Eng RPM NA
    Standard PTO Speed @ Eng Speed NA
    Maximum PTO Power @ Eng RPM NA
    Maximum Engine Power @ Eng RPM NA
    Max Unballasted Drawbar Power @ Eng RPM NA
    75% Load, Full Engine RPM (Unballasted) NA
    75% Load @ Reduced RPM (Unballasted) NA
Transmission  
    Std. Transmission; Forward/Reverse PowrQuad 16/16
    Opt. Transmission; Forward/Reverse PowrQuad 20/20
    Reverser LH Base
    On-the-Go Shifting (Yes/No/Partial) Yes
    Clutch; Wet/Dry Wet
    Creeper Opt
Power Take-Off (PTO)  
    Standard Independent 540/1000
    Optional N/A
    PTO Speeds @ Engine RPM NA
    PTO Actuation Electrohydraulic
Hydraulics  
    Type Constant Flow Load Sensing
    Pump Rated Output, GPM (L/min.) ---
        Standard 21.1
        Optional N/A
    Rated Flow @ One SCV, GPM (L/min.) NA
    Max Output @ SCV Couplers, GPM (L/min.) NA
    Maximum Operating Pressure, PSI (kPa) 2500 (17,236)
    Maximum Hydraulic Power, HP (kW) NA
    Hitch Draft Control Load Sense Type Electrohydraulic
    Remote Control Valves Available 1, 2, 3, or 4
    Hitch Category (SAE Designation) 2, 3N Optional
    Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. ---
        OECD ---
        Standard 8800
        Optional Cat 3N/2 - 8200
    Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE) ---
        Standard NA
        Optional NA
    Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE) ---
        Standard NA
        Optional NA
    Sensing Type Electronic Lower Link
    Joystick SCV Control N/A
Final Drive  
    Type Inboard Planetary
    Differential Controls Electrohydraulic
    Availability ---
        Front Yes
        Front & Rear Yes
    Engage On-the-Go Rear Differential Lock Yes
    Axle Type Flanged
    Brakes, Type and Control Hydraulic
Operator Station  
    Rollover Protective Structure, OOS N/A
        Rigid - Foldable - Telescopic N/A
        Platform - Flat/Straddle N/A
        Gearshift Location - Console/Floor N/A
    Cab Cab
        Doors 2
        Platform - Flat/Straddle Flat
        dB(A) Rating N/A
        Seat Suspension System Mechanical, Air Optional
2WD Dimensions  
    Wheelbase, in. (mm) 104.3 (2650)
    Front Tread Range, in. (mm) 59.5-85.5 (1515-2225)
    Rear Tread Range, in. (mm) N/A
    Minimum Rear Tread Setting, in. (mm) 63.5 (1612)
    Front Axle Clearance, in. (mm) N/A
    Turning Radius w/Brakes, ft. (m) N/A
    Turning Radius w/o Brakes, ft. (m) 15.3 (4.65)
    Unballasted Operating Weight, lb. (kg) 8776 (3980)
    Approx. Ship Wgt, lb. (kg) Open; Cab 9657 (4380)
MFWD Dimensions  
    Wheelbase, in. (mm) 104.3 (2650)
    Front Tread Range, in. (mm) 59.4-88 (1510-2235)
    Front Axle Clearance, in. (mm) 20.7 (52.5)
    Turning Radius w/Brakes, ft. (m) N/A
    Turning Radius w/o Brakes, ft. (m) 16.1 (4.9)
    Limited Slip Differential Standard
    Unballasted Operating Weight, lb. (kg) N/A
    Approx. Ship Wgt, lb. (kg) Open; Cab 10,252 (4660)
4WD Dimensions  
    Wheelbase, in. (mm) N/A
    Wheel Tread, Min. to Max. in. (mm) N/A
    Turning Radius w/o Brakes, ft. (m) N/A
    Nebraska Test Unballasted w/Duals, lb.(kg) N/A
    Unballasted Weight, lb. (kg) N/A
Standard Tires  
    2WD ---
        Front 10.00-16
        Rear 18.4R38
    MFWD ---
        Front 14.9R28
        Rear 18.4R38
    4WD N/A
    Track Widths N/A
Miscellaneous  
    Country of Manufacture Waterloo, Iowa
    Ballasting Restrictions, lb. (kg) Refer to Operator's Manual
    *Notes Updated - 03/17/2009