Specifications: 6330 available from Colby & Oakley Implement, KS

 
Specifications: 
MANUFACTURER John Deere
MODEL 6330 Tractor
Official Test  
    Nebraska Test Number N/A
Engine  
    Manufacturer John Deere 4.5L PowerTech E (2 valve)
    Aspiration 2 valve, fixed geometry turbocharger with air-to-water aftercooling
    Cylinders/Displacement, cu. in. (liters) 4/276 (4.5)
    Cylinder Liners Wet
    Fuel Tank Cap., US Gal. (L) (Open; Cab) Cab
        Standard 43.6 (165)
        Optional 48.8 (185)
    Underhood muffler Yes
Performance  
    Advertised PTO HP (kW) @ Rated RPM 85.0 (63) @ 2300 per SAE
    Official PTO HP (kW) @ Rated RPM N/A
        @ Standard PTO @ Eng RPM N/A
        Maximum @ Eng RPM N/A
    Advertised Engine HP (kW) @ Rated Speed 105 (78) @ 2300 per ISO 97/68/EC
    Max Unballast Drwbr HP (kW) @ Eng RPM N/A
    Maximum Torque (PTO) @ RPM, lb-ft (Nm) N/A
    Max Torque Rise (80% Rtd Spd) @ Eng RPM N/A
    Maximum Torque Rise % (PTO) @ Eng RPM N/A
Fuel Use, U.S. gal./hr. & HP hr./gal. at:  
    PTO @ Rated Eng RPM N/A
    Standard PTO Speed @ Eng Speed N/A
    Maximum PTO Power @ Eng RPM N/A
    Maximum Engine Power @ Eng RPM N/A
    Max Unballasted Drawbar Power @ Eng RPM N/A
    75% Load, Full Engine RPM (Unballasted) N/A
    75% Load @ Reduced RPM (Unballasted) N/A
Transmission  
    Std. Transmission; Forward/Reverse SyncroPlus 12F/4R (19 mph / 30 km/h)
    Opt. Transmission; Forward/Reverse Sync. 16/16; LH Reverser, PowrQuad 16/16, PowrQuad 24/24
    Reverser Yes, Except Syncro 12F/4R
    On-the-Go Shifting (Yes/No/Partial) Yes
    Clutch; Wet/Dry Wet
    Creeper Optional
Power Take-Off (PTO)  
    Standard Independent 540
    Optional 540/1000
    PTO Speeds @ Engine RPM N/A
    PTO Actuation Electrohydraulic
Hydraulics  
    Type Constant Flow Load Sensing
    Pump Rated Output, GPM (L/min.) N/A
        Standard 21.1
        Optional ---
    Rated Flow @ One SCV, GPM (L/min.) N/A
    Max Output @ SCV Couplers, GPM (L/min.) N/A
    Maximum Operating Pressure, PSI (kPa) 2900 (19,995)
    Maximum Hydraulic Power, HP (kW) N/A
    Hitch Draft Control Load Sense Type N/A
    Remote Control Valves Available 1, 2, 3, or 4
    Hitch Category (SAE Designation) 2
    Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. N/A
        OECD ---
        Standard 4450
        Optional N/A
    Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE) ---
        Standard N/A
        Optional N/A
    Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE) ---
        Standard N/A
        Optional N/A
    Sensing Type Optional Electronic Lower Link
    Joystick SCV Control Mechanical
Final Drive  
    Type Inboard Planetary
    Differential Controls Electrohydraulic
    Availability ---
        Front Yes
        Front & Rear Yes
    Engage On-the-Go Rear Differential Lock Yes
    Axle Type Flange, Rack and Pinion Optional
    Brakes, Type and Control Disc, Self-Adjusting, Self-Equalizing
Operator Station  
    Rollover Protective Structure, OOS N/A
        Rigid - Foldable - Telescopic Foldable
        Platform - Flat/Straddle Flat
        Gearshift Location - Console/Floor Floor
    Cab Cab
        Doors 2
        Platform - Flat/Straddle Flat
        dB(A) Rating 71 Factory Observed
        Seat Suspension System Mech. Seat w/ ComfortGard Premium Cab
2WD Dimensions  
    Wheelbase, in. (mm) 94.5 (2400)
    Front Tread Range, in. (mm) 60.4-80.4 (1533-2041)
    Rear Tread Range, in. (mm) 63.5-75.2 (1612-1910)
    Minimum Rear Tread Setting, in. (mm) 63.5 (1612)
    Front Axle Clearance, in. (mm) N/A
    Turning Radius w/Brakes, ft. (m) N/A
    Turning Radius w/o Brakes, ft. (m) 13.9 (4.24)
    Unballasted Operating Weight, lb. (kg) 7695 (3490)
    Approx. Ship Wgt, lb. (kg) Open; Cab 7695 (3490); 9491 (4305)
MFWD Dimensions  
    Wheelbase, in. (mm) 94.5
    Front Tread Range, in. (mm) 60-79.4 (1524-2016)
    Front Axle Clearance, in. (mm) 18.7 (47.5)
    Turning Radius w/Brakes, ft. (m) N/A
    Turning Radius w/o Brakes, ft. (m) 14.7 (4.48)
    Limited Slip Differential Standard
    Unballasted Operating Weight, lb. (kg) N/A
    Approx. Ship Wgt, lb. (kg) Open; Cab 8987 (4076); 10009 (4540)
4WD Dimensions  
    Wheelbase, in. (mm) N/A
    Wheel Tread, Min. to Max. in. (mm) N/A
    Turning Radius w/o Brakes, ft. (m) N/A
    Nebraska Test Unballasted w/Duals, lb.(kg) N/A
    Unballasted Weight, lb. (kg) N/A
Standard Tires  
    2WD ---
        Front 10.0-16.0
        Rear 18.4R34
    MFWD ---
        Front 14.9R24
        Rear 18.4R34
    4WD ---
    Track Widths N/A
Miscellaneous  
    Country of Manufacture Mannheim, Germany
    Ballasting Restrictions, lb. (kg) 18,077 (8200)
    *Notes Updated - 03/05/2010