| Specifications: | |
| MANUFACTURER |
John Deere |
| MODEL |
20A Open Station |
| Official Test |
|
| Nebraska Test Number |
--- |
| Engine |
|
| Manufacturer |
Lombardini |
| Aspiration |
Natural |
| Cylinders/Displacement, cu. in. (liters) |
2/57 (.954) |
| Cylinder Liners |
Parent Bore |
| Fuel Tank Cap., US Gal. (L) (Open; Cab) |
--- |
| Standard |
6 (24) |
| Optional |
--- |
| Underhood muffler |
No |
| Performance |
|
| Advertised PTO HP (kW) @ Rated RPM |
--- |
| Official PTO HP (kW) @ Rated RPM |
17 (12.5) @ 3000 |
| @ Standard PTO @ Eng RPM |
--- |
| Maximum @ Eng RPM |
18.5 (13.6) @ 2600 |
| Advertised Engine HP (kW) @ Rated Speed |
21 (15) @ 3000 |
| Max Unballast Drwbr HP (kW) @ Eng RPM |
--- |
| Maximum Torque (PTO) @ RPM, lb-ft (Nm) |
39 (53) @ 2300 |
| Max Torque Rise (80% Rtd Spd) @ Eng RPM |
18% @ 2400 |
| Maximum Torque Rise % (PTO) @ Eng RPM |
32% @ 2300 |
| Fuel Use, U.S. gal./hr. & HP hr./gal. at: |
|
| PTO @ Rated Eng RPM |
.76 (2.87) and 22.3 (5.92) @ 3000 |
| Standard PTO Speed @ Eng Speed |
--- |
| Maximum PTO Power @ Eng RPM |
.74 (2.79) and 25 (6.63) @ 2600 |
| Maximum Engine Power @ Eng RPM |
.76 (2.87) and 22.3 (5.92) @ 3000 |
| Max Unballasted Drawbar Power @ Eng RPM |
--- |
| 75% Load, Full Engine RPM (Unballasted) |
--- |
| 75% Load @ Reduced RPM (Unballasted) |
--- |
| Transmission |
|
| Std. Transmission; Forward/Reverse |
6+3 Gear |
| Opt. Transmission; Forward/Reverse |
--- |
| Reverser |
No |
| On-the-Go Shifting (Yes/No/Partial) |
Partial |
| Clutch; Wet/Dry |
Dry |
| Creeper |
No |
| Power Take-Off (PTO) |
|
| Standard |
Continuous live - Single stage clutch |
| Optional |
--- |
| PTO Speeds @ Engine RPM |
540 @ 2808 |
| PTO Actuation |
Mechanical |
| Hydraulics |
|
| Type |
Open Center |
| Pump Rated Output, GPM (L/min.) |
--- |
| Standard |
5 (19) |
| Optional |
--- |
| Rated Flow @ One SCV, GPM (L/min.) |
--- |
| Max Output @ SCV Couplers, GPM (L/min.) |
--- |
| Maximum Operating Pressure, PSI (kPa) |
Steering-1306 (9000) / Implement-1814 (12500) |
| Maximum Hydraulic Power, HP (kW) |
--- |
| Hitch Draft Control Load Sense Type |
N/A |
| Remote Control Valves Available |
N/A |
| Hitch Category (SAE Designation) |
Drawbar ASAE 207.12 -1/1N |
| Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. |
--- |
| OECD |
--- |
| Standard |
1100 (500) |
| Optional |
--- |
| Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE) |
--- |
| Standard |
--- |
| Optional |
--- |
| Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE) |
--- |
| Standard |
--- |
| Optional |
--- |
| Sensing Type |
N/A |
| Joystick SCV Control |
--- |
| Final Drive |
|
| Type |
Inboard Planetary |
| Differential Controls |
Mechanical foot pedal |
| Availability |
--- |
| Front |
--- |
| Front & Rear |
--- |
| Engage On-the-Go Rear Differential Lock |
Yes, standard |
| Axle Type |
Flanged |
| Brakes, Type and Control |
Hydraulic Wet-Disk |
| Operator Station |
|
| Rollover Protective Structure, OOS |
--- |
| Rigid - Foldable - Telescopic |
Foldable, 2-Post |
| Platform - Flat/Straddle |
Straddle |
| Gearshift Location - Console/Floor |
Floor |
| Cab |
--- |
| Doors |
N/A |
| Platform - Flat/Straddle |
Straddle |
| dB(A) Rating |
--- |
| Seat Suspension System |
Mechanical |
| 2WD Dimensions |
|
| Wheelbase, in. (mm) |
--- |
| Front Tread Range, in. (mm) |
--- |
| Rear Tread Range, in. (mm) |
--- |
| Minimum Rear Tread Setting, in. (mm) |
--- |
| Front Axle Clearance, in. (mm) |
--- |
| Turning Radius w/Brakes, ft. (m) |
--- |
| Turning Radius w/o Brakes, ft. (m) |
--- |
| Unballasted Operating Weight, lb. (kg) |
--- |
| Approx. Ship Wgt, lb. (kg) Open; Cab |
--- |
| MFWD Dimensions |
|
| Wheelbase, in. (mm) |
39 (991) |
| Front Tread Range, in. (mm) |
42 - 48 (1067 - 1219) |
| Front Axle Clearance, in. (mm) |
9.25 (235) |
| Turning Radius w/Brakes, ft. (m) |
3.9 (1.2) |
| Turning Radius w/o Brakes, ft. (m) |
--- |
| Limited Slip Differential |
--- |
| Unballasted Operating Weight, lb. (kg) |
--- |
| Approx. Ship Wgt, lb. (kg) Open; Cab |
1654 (750) - Open |
| 4WD Dimensions |
|
| Wheelbase, in. (mm) |
--- |
| Wheel Tread, Min. to Max. in. (mm) |
--- |
| Turning Radius w/o Brakes, ft. (m) |
--- |
| Nebraska Test Unballasted w/Duals, lb.(kg) |
--- |
| Unballasted Weight, lb. (kg) |
--- |
| Standard Tires |
|
| 2WD |
--- |
| Front |
--- |
| Rear |
--- |
| MFWD |
--- |
| Front |
6.5/80 x 15 6PR R1 Bias |
| Rear |
6.5/80 x 15 6PR R1 Bias |
| 4WD |
--- |
| Track Widths |
--- |
| Miscellaneous |
|
| Country of Manufacture |
Italy |
| Ballasting Restrictions, lb. (kg) |
--- |
| *Notes |
Updated 11/17/2008 |
