| MANUFACTURER MODEL |
| John Deere 512 |
 |
| Tool |
|
| Configuration |
Disk - Ripper - Disk |
|
| Option 1 |
5-standard on 30-in. spacing |
|
| Option 2 |
7-standard on 30-in. spacing |
|
| Option 3 |
7-standard on 30-in. spacing (low transport) |
|
| Option 4 |
9-standard on 30-in. spacing |
|
| Option 5 |
--- |
|
| Option 6 |
--- |
|
| Option 7 |
--- |
|
| Option 8 |
--- |
|
| Option 9 |
--- |
|
| Option 10 |
--- |
|
| Option 11 |
--- |
|
| Option 12 |
--- |
|
| Option 13 |
--- |
|
| Option 14 |
--- |
|
| Option 15 |
--- |
|
| Option 16 |
--- |
|
| Option 17 |
--- |
|
| Working Width |
|
| Option 1 |
12-ft. 6-in. |
|
| Option 2 |
17-ft. 6-in. |
|
| Option 3 |
17-ft. 6-in. |
|
| Option 4 |
22-ft. 6-in. |
|
| Option 5 |
--- |
|
| Option 6 |
--- |
|
| Option 7 |
--- |
|
| Option 8 |
--- |
|
| Option 9 |
--- |
|
| Option 10 |
--- |
|
| Option 11 |
--- |
|
| Option 12 |
--- |
|
| Option 13 |
--- |
|
| Option 14 |
--- |
|
| Option 15 |
--- |
|
| Option 16 |
--- |
|
| Option 17 |
--- |
|
| Transport Width |
|
| Option 1 |
15-ft. 6-in. |
|
| Option 2 |
20-ft. 8-in. |
|
| Option 3 |
18-ft. |
|
| Option 4 |
18-ft. |
|
| Option 5 |
--- |
|
| Option 6 |
--- |
|
| Option 7 |
--- |
|
| Option 8 |
--- |
|
| Option 9 |
--- |
|
| Option 10 |
--- |
|
| Option 11 |
--- |
|
| Option 12 |
--- |
|
| Option 13 |
--- |
|
| Option 14 |
--- |
|
| Option 15 |
--- |
|
| Option 16 |
--- |
|
| Option 17 |
--- |
|
| Depth |
|
| Maximum operating depth, in. |
16 |
|
| Transport Clearance |
|
| Standard, in. |
9 |
|
| Underframe Clearance |
|
| Maximum, in. |
37.5 |
|
| Speed |
|
| Operating speed |
5-6 |
|
| Horsepower |
|
| Horsepower required per standard |
37-55 |
|
| Depth Control |
|
| Option 1 |
Single point crank |
|
| Option 2 |
Electro-hydraulic TouchSet |
|
| Hydraulics |
|
| Option 1 |
1 SCV (lift) at 2500 psi for optimum raise times |
|
| Option 2 |
2 SCVs (lift and low transport) at 2500 psi for optimum raise times |
|
| Hitch |
|
| Design |
Single tube |
|
| Fore-aft adjustment |
Hitch turnbuckle |
|
| Standards |
|
| Spacing, in. |
30 |
|
| Frame cross section |
--- |
|
| Standards, Option 1 |
|
| Trip force, lb. |
Cushion-Trip standard - 4100 |
|
| Trip height, in. |
13 (shear bolt protected above) |
|
| Type |
Parabolic with or without wear shins, straight with wear shins |
|
| Standards, Option 2 |
|
| Trip force, lb. |
Spring-Reset ripper standard - 3200-4700 |
|
| Trip height, in. |
22 |
|
| Type |
Parabolic with or without wear shins |
|
| Standards, Option 3 |
|
| Trip force, lb. |
Shear-bolt standard - 9000 |
|
| Trip height, in. |
--- |
|
| Type |
Parabolic or straight with wear shins |
|
| Ground Engaging Components |
|
| Type |
2.75, 5, 7, 10 in. Extreme LaserRips |
|
| Coverboards |
--- |
|
| Wear shin |
optional |
|
| Mulching Disk Components |
|
| Description |
One set in front of the standards, one set behind the standards |
|
| Depth control |
--- |
|
| Maximum depth, in. |
6 |
|
| Type of standard |
C-spring |
|
| Base equipment blades |
24 X .256-in. front and rear solid (optional cut-out front blades) |
|
| Blade spacing, in. |
11 |
|
| Front frame angle |
18 degrees fixed |
|
| Rear frame angle |
16 or 14 degrees |
|
| Spools |
5.5-in. steel fabricated with 1.25-in. square gang bolt |
|
| Bearings |
Dura-Flex |
|
| Scraper |
Combination |
|
| Rear Conditioner |
|
| Description |
NA |
|
| Adjustments |
NA |
|
| Type of standard |
NA |
|
| Base equipment blades |
NA |
|
| Bearings |
NA |
|
| Tires |
|
| Type |
12.5L-15 FI D LT (4) centerframe (11L-15 for rigid); 11L-15 FI D LR (2) wing frame |
|
| Wheels |
|
| Type |
Tandem Walk-Over wheels |
|
| Rear Hitch |
|
| Type |
6500 lb. maximum GVW and 1000 lb. maximum tongue weight |
|
| Approximate Weight |
|
| Option 1, lb |
--- |
|
| Option 2, lb |
--- |
|
| Option 3, lb |
--- |
|
| Option 4, lb |
--- |
|
| Option 5, lb |
--- |
|
| Option 6, lb |
--- |
|
| Option 7, lb |
--- |
|
| Option 8, lb |
--- |
|
| Option 9, lb |
--- |
|
| Option 10, lb |
--- |
|
| Option 11, lb |
--- |
|
| Option 12, lb |
--- |
|
| Option 13, lb |
--- |
|
| Option 14, lb |
--- |
|
| Option 15, lb |
--- |
|
| Option 16, lb |
--- |
|
| Option 17, lb |
--- |
|
| Additional Features |
|
| Option 1 |
individually mounted rear conditioner blades for accurate settings |
|
| Option 2 |
--- |
|
| Option 3 |
--- |
|
| Option 4 |
--- |
|
| Option 5 |
--- |
